Glossary – Buffalo Technology WLI-CB-AG108HP User Manual

Page 30

Advertising
background image

0

Default Parameter: Parameter set by the

manufacturer.
Destination Address: The address portion

of a packet that identifies the intended

recipient station.
DHCP (Dynamic Host Configuration

Protocol): Based on BOOTP, it uses a pool

of IP addresses, which it assigns to each

device connected to it, and retrieves the

address when the device becomes dormant

for a period of time.
DNS (Domain Name System): System used

to map readable machine names into IP

addresses
Driver: Software that interfaces a computer

with a specific hardware device.
DSSS (Direct Sequence Spread Spectrum):

Method of spreading a wireless signal into

wide frequency bandwidth.

DTE (Data Terminal Equipment): Device

that controls data flowing to and from a

computer.
Dynamic IP Address: An IP address that is

automatically assigned to a client station

in a TCP/IP network, typically by a DHCP

server.
ESS (Extended Service Set): A set of two or

more BSSs that form a single sub-network.

ESS-ID is user identification used in the

ESS LAN configuration.
Ethernet: The most widely used architecture

for Local Area Networks (LANs). It is

a shared-media network architecture.

The IEEE 802.3 standard details its

functionality.
Ethernet cable: A wire similar to telephone

cable that carries signals between Ethernet

devices.

Glossary

Advertising