Brinkmann ProSeries 4675 - Manual (Page 34)

33
Igniter Cap Battery
Cooking Grills
Heat Distribution
Plates
Grooves
Warming Rack Step 29
Place the heat distribution plates
on lower level of grill body
assembly directly above burners.
Step 30
Place cooking grills on support
ribs directly above heat
distribution plates.
Step 31
Place warming rack on grooves so
that it sits above the cooking grills.
Step 32
Remove igniter cap and insert
battery with positive end of battery
toward igniter cap. Replace igniter
cap and make sure the igniter is
working properly.