CARR 301861 HD 18” Tube Step - Manual (Page 4)

STANDARD VERTICAL MOUNT
CHEVY / GMC
‘92-‘99 SUBURBAN / ’92-‘99 YUKON/TAHOE
DRIVER’S SIDE SHOWN
HD 18” Tube Step Installation Instructions
Part No’s: 301860 / 3001861
WARNINGS: Do not over tighten the nuts and bolts or damage to the castings and or stripping of the threads could result.
WARNINGS: FOR SAFE AND PROPER USAGE OF THIS PRODUCT, THE MOUNTING INSTRUCTIONS MUST BE FOLLOWED CAREFULLY AND
COMPLETELY.
WARNINGS: The manufacturer and distributor of this product are in no way responsible for the consumer’s failure to adhere to the warnings and
directions of these instructions in the event of damage to the consumer’s vehicle, other properties and or personal injury.
Materials Furnished:
Two 18” tubes, four black mounting castings, four zinc plated steel brackets, four zinc plated steel mounting feet, Instruction sheet and two
hardware packs (Important! Not all of the parts in these hardware packs may be needed for proper installation).
Tools Needed:
Phillips Screwdriver, two 1/2” open or box wrenches, 10mm socket, pencil, center punch, drill motor, sharp 1/8” drill bit, sharp 5/16” drill bit.
WAX YOUR STEP ON A REGULAR BASIS TO
MAINTAIN ITS LUSTER
Use the 5/16 X 2 ½” Button
Head bolts when assembling the
black mounting castings to the
open ends of the tube.
For proper alignment, the
tread plate can be rotated
in three different
positions.
Detail A
Mounting Feet
Steel Brackets
Body Metal