Bowe, Bell + Howell S004011 - Manual (Page 16)

5
Understanding the Indicators
The scanner has the following indicators:
TH2H030E
1: Power On
2: Machine Busy
3: Document in Place
4: Error
When the scanner is in a normal operating state, the indicators will light in one of the combina-
tions shown below. If the indicators light in any other pattern, an error has occurred. Refer to p.
28, “Error Indicators and Solutions.”
Description
❍ ❍ ❍ ❍ When the power has just been turned on, or the
Reset switch has been pressed (This combination
is displayed only for a few seconds.)
❍ ● ● ● When there is no document in the Auto Docu-
ment Feeder, and no document is being scanned
❍ ● ❍ ● When there is a document in the Auto Document
Feeder, but the document is not being scanned
❍ ❍ ● ● When scanned data is being transferred (and there
is no document in the ADF)
❍ ❍ ❍ ● When scanned data is being transferred (and there
is a document in the ADF)
❍ ● ✕ ● When the scanner is ready for manual scanning
✕ ● ● ● When the scanner is ready by Low Power Mode
❍ : On
✕ : Flashing
● : Off
Guide to the Scanner
1
2
3
4