JB Conversions 15-1102 Dana 300 - Manual

1
Dana 300
Rotation Plate
Manufactured by JB CONVERSIONS, INC.
Phone: 337-625-2379
Installation Instructions
Part No. 15-1102
Instruction Rev: 2010.01.05
Kit Components
. Billet clocking plate
. (6) Allen cap bolts
. (6) "Interference fit" studs
. Extended length input gear
. New oil seal
1) Drain the oil from the Dana 300.
2) Remove the 8 allen (or torx) cap screws from the aluminum bearing
retainer and carefully separate and remove the retainer from the Dana 300
case.