Select Increments Dash-Pod User Manual

Select Increments Car speakers

Advertising
background image

Push grommet over each pair of plugs starting with the
large spade first. It’s a tight fit, but it minimizes hole size.

Feed the spade terminals
through the 7/16” hole
on back of each pod and
push grommet into hole.

Gently pull excess wire from pods.
We recommend sealing any air-
space around wires with glue gun.

Noteworthy: Backsides of one or both pod(s) may come in contact with heater ducts, which is normal, and the ducts will flex
slightly to accept the pods when they’re screwed in place. This was done to maximize mounting diameter and depth in each pod.
Also, ‘97-’00 models may have the driver side pod contact the headlight switch base due to tolerances from the factory, which is
also normal and twisting the switch slightly will aide with this; call us if you still have trouble with this switch.

* Color copies can be printed at

www.selectincrements.com

for better clarity, if necessary.

TJ DASH-PODS INSTALLATION

Screw speakers to pods with
the included #10 X 3/8” screws

Remove the speaker covers from
your TJ

’s dash with a Phillips

screwdriver, 2 screws per side.

Remove your current dash speakers with a Phillips
screwdriver, 4 screws per side. (You will reuse
these screws for the pods, so keep them aside).
Unplug the speakers from the factory plugs.

Remove foam pieces if
your TJ has them.

1

2

3

Plug your DASH-PODS into
your existing factory wire
harness and reuse the mounting
plate screws that held your old
speakers in place to mount your
DASH-PODS. (It is normal to
have the backs of the pods hit
and flex the heater ducts in some
instances.) Replace the speaker
covers and you

’re done!

www.selectincrements.com

Email:

[email protected]

Phone: 610-345-9044

4

7

8

9

Connect spade terminals to
speakers .

5

Gently push
speaker
spade
terminals
inward
toward the
magnet if
needed for
wall
clearance.

Before you screw the speakers
to the pods…
You may need to cut top inner
corners of speaker frames
to get clearance around
the metal bracing of the
dash. Only the corners shown
here may need to be cut, and
possibly just the Driver Side Pod.

Passenger Side

Driver Side

6

(only if using 4x6 speakers)

10

OR

11

12

(Generally ‘97-’00)

If you have these

brackets, turn page

over. If not,

continue to #13.

13

Advertising