Brother V61 - Manual (Page 49)

47
3
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
BASIC STITCHING
Straight stitches are used for sewing plain seams. Three stitches are available for basic stitching.
*Rev.: Reverse **Rfc.: Reinforcement ***Do not use reverse stitching.
Basic stitching
a
Baste or pin together the fabric pieces.
b
Attach zigzag foot “J”.
c
Select a stitch.
• For details, refer to “Selecting stitching”
(page 37).
d
Lower the needle into the fabric at the
beginning of the stitching.
e
Start sewing.
• For details, refer to “Starting to sew”
(page 39).
• For details on sewing reverse/reinforcement
stitches, refer to “Sewing reinforcement
stitches” (page 40).
f
When sewing is finished, cut the thread.
• For details, refer to “Starting to sew”
(page 39).
■ Changing the needle position
With the straight stitch (left needle position) and
the triple stretch stitch, the needle position can be
adjusted. Pressing the “+” side of the stitch width
adjustment key moves the needle to the right;
pressing the “–” side of the stitch width
adjustment key moves the needle to the left.
a Stitch width
b Stitch width adjustment key
c Left needle position
d Right needle position
Stitch Name
Pat
ter
n
Pr
ess
er Foot
Pattern No.
Application
Stitch Width
[mm (inch.)]
Stitch Length
[mm (inch.)]
Tw
in
N
ee
dle
W
alki
ng Foot
Rever
se/
Re
in
fo
rc
em
en
t
St
it
ch
in
g
70 st
it
ches
m
odel
60 st
it
ches
m
odel
50 st
it
ches
m
odel
40 st
it
ches
m
odel
Auto Manual Auto Manual
St
ra
ig
ht
Left J 00 00 00 00 Basic stitching, sewing
gathers or pintucks, etc.
0.0
(0)
0.0–7.0
(0–1/4)
2.5
(3/32)
0.2–5.0
(1/64–3/16)
No
***
Yes
*
Rev.
Center J 01 01 01 01
Attaching zippers, basic
stitching, and sewing
gathers or pintucks, etc.
– –
2.5
(3/32)
0.2–5.0
(1/64–3/16)
Yes
( J )
***
Yes
*
Rev.
Triple
stretch stitch
J 02 02 02 02
Attaching sleeves, sew-
ing inseams, sewing
stretch fabrics and deco-
rative stitching
0.0
(0)
0.0–7.0
(0–1/4)
2.5
(3/32)
1.5–4.0
(1/16–3/16)
No No
**
Rfc.
● Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if
the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing.
CAUTION