Bosch BSH Dishwasher User Manual
Page 11
11
SECURING THE DISHWASHER
1 Drive the mounting screws through the holes in the
mounting brackets as shown in
Figure 21 for Top or
Side Mount.
2 After the unit is installed in the enclosure, leveled and
secured, lock the two front leg levelers in place by
driving the enclosed leg leveler locking screws into
each screw boss located in front of the levelers. See
Figure 22.
3 Tighten screws until they are flush with the surface of
the bosses.
a
b
Placing the Dishwasher/ Securing the Dishwasher
Figure 21
Top Mount
Side Mount
Figure 20
Leg
Leveler
Locking
Screw
Screw
Boss
Figure 22
Installation of the Rubber Drain Hose
Adaptor
1 Obtain the Rubber Drain Hose Adaptor and the two
hose clamps from the Dishwasher Installation Kit
(do
not substitute).
2 On one outside end of the Rubber Drain Hose
Adapter is a raised rib. Insert the dishwasher drain
hose into the
end without the raised rib (see Figure
23). Be sure to fully insert the drain hose.
3 Secure the connection with the Spring Clamp (see
Figure 24).
4 Use the Screw Clamp to attach the Rubber Drain
Hose Adaptor to the house plumbing (see
Figure 24).
Spring
Clamp
Screw
Clamp
Figure 24
Figure 23
Raised Rib
Rubber Drain Hose Adaptor
(cross section)
Dishwasher
Drain Hose
Connects to house-
hold plumbing
Insert until drain
hose locks in place
Raised
Rib on
Outside
of Drain
Hose
Adaptor