Sell or give away ipad, Learning more, service, and support, No image on tv or projector connected to ipad – Apple iPad iOS 7.1 User Manual

Page 136

Advertising
background image

Appendix D

Safety, Handling, & Support

136

Some apps play only audio over AirPlay. If video isn’t working, make sure that the app you’re
using supports both audio and video.

If the Apple TV has been set up to require a passcode, you must enter it on iPad when asked,
in order to use AirPlay.

Make sure the speakers on the AirPlay device are turned on and turned up. If you’re using an
Apple TV, make sure the TV’s input source is set to Apple TV. Make sure the volume control on
iPad is turned up.

When iPad is streaming with AirPlay, it must remain connected to the Wi-Fi network. If you
take iPad out of range, playback stops.

Depending on the speed of your network, it may take 30 seconds or more for playback to
begin when using AirPlay.

For more information about AirPlay, see

support.apple.com/kb/HT4437

.

No image on TV or projector connected to iPad

When you connect iPad to a TV or projector using a USB cable, the attached display
automatically mirrors the iPad screen. Some apps may support using the attached display as a
second monitor. Check the app’s settings and documentation.

To view HD videos in high resolution, use the Apple Digital AV Adapter or a component
video cable.

Make sure the video cable is firmly connected at both ends, and that it’s a supported cable.
If iPad is connected to an A/V switchbox or receiver, try connecting it directly to the TV or
projector instead.

Make sure that your TV has the proper video input selected, such as HDMI or
component video.

If no video appears, press the Home button, disconnect and reconnect the cable, and
try again.

Sell or give away iPad?

Before you sell or give away your iPad, be sure to erase all content and your personal information.
If you’ve enabled Find My iPad (see

Find My iPad

on page 35), Activation Lock is on. You need to

turn off Activation Lock before the new owner can activate iPad under his or her own account.
Erase iPad and remove Activation Lock. Go to Settings > General > Reset > Erase All Content
and Settings.

See

support.apple.com/kb/HT5661

.

Learning more, service, and support

Refer to the following resources to get more iPad-related safety, software, service, and
support information.

To learn about

Do this

Using iPad safely

See

Important safety information

on page 128.

iPad service and support, tips, forums,
and Apple software downloads

Go to

www.apple.com/support/ipad

.

The latest information about iPad

Go to

www.apple.com/ipad

.

Advertising