Apple iPod Hi-Fi - Manual (Page 24)

24
4
4
Tips and Troubleshooting
Most problems with your iPod Hi-Fi can be solved quickly by
following the advice in this chapter.
If your iPod Hi-Fi won’t play music or respond
 Make sure the volume isn’t turned down all the way. If another audio device is
connected, make sure the volume on that device isn’t turned down all the way.
 Unplug your iPod Hi-Fi, wait about five seconds, and plug it in again. Make sure the
power cord connectors on both ends of the power cord are pushed in all the way.
 If you’re using batteries, make sure the batteries are inserted correctly.
 If an iPod and another audio device are connected, make sure your iPod Hi-Fi is set to
play from the device you want (see page 18).
 The batteries may need to be replaced (see page 12).
If your iPod won’t respond
 Make sure the Hold switch is off and your iPod is not paused.
 Reset your iPod. Connect iPod to your iPod Hi-Fi, set the Hold switch to HOLD, and
then turn it off again. Then press and hold the Center and Menu buttons for about six
seconds, until the Apple logo appears.
Note: If you have an original iPod with a dock connector (with four buttons below the
display), press and hold the Play/Pause (’) and Menu buttons to reset it.