Apple Logic Pro 7 (TDM Guide) - Manual (Page 27)

Chapter 3 ESB TDM and EXS24 TDM 27
Within mono Aux Objects, you can select the desired output channel of the DTDM
mixer (ESB 1–8). Stereo Aux channels can be set to input channel pairs ESB1–2, 3–4, 5–
6, and 7–8. Please take a closer look at the available inputs:
Please note that Logic handles mono and stereo channel settings separately. This
means that you can set up the ESB inputs for eight mono channels, and then switch
the Audio Objects to stereo operation. Once the desired DTDM output channels are set
appropriately for each Aux Input, save your Autoload Template. This will allow you to
switch quickly between mono and stereo setups, without needing to reset the settings
each time.
Copying the Mixer Setup
Each song separately memorizes the settings for each audio hardware device
supported by Logic. In order to copy the mixer setup from, say, a Core Audio device to
DTDM, select the Audio > Audio Configuration menu option. Once the Audio
Configuration window has launched, select Core Audio in the local device menu. Now,
copy the setup using the Edit > Copy command, select DTDM in the device menu, and
choose Edit > Paste. You can even copy and paste between songs.
The easiest way to load a song that originated on a Core Audio system into a
DAE/DTDM system:
1 Deactivate DAE and ensure that DTDM is active.
2 Ensure that the Universal Track Mode setting is the same for both Core Audio on the
song’s origin system and DTDM on your system.
3 Open this song, and you will be asked for automatic conversion to DTDM. When the
converted song has loaded, reactivate DAE.
4 Relaunch Logic, and create the required DAE Audio Objects.
Note: Full functionality of DTDM requires that the ESB inputs must be actively chosen
in DAE Aux Objects.