Apple Logic Pro 7 (TDM Guide) - Manual (Page 35)

Chapter 5 Tips and Tricks 35
The number of TDM streams used by the DAE is displayed in the TDM DSP Usage
window (Audio > TDM DSP Usage). Check out this window to see how many streams are
used, and how many are available for further EXS24 TDM or HTDM instruments and
plug-ins.
Bounce Strategies
The easiest way to perform a stereo bounce is to choose File > Bounce. This will open
the Bounce dialog for Outputs 1/2 of your primary audio hardware. It is highly
recommended that you use the first output pair of your audio device for main playback
duties.
Note: If you are using other Output Objects for primary playback duties, please use the
Bounce button on these Objects.
You can set the file format, bit depth and sample rate of the bounce file in the Bounce
dialog. More information about other parameters can be found in the Logic reference.
Note: Ensure that your Master Object is set to 0 dB, to achieve the full resolution and
maximum gain while bouncing.
DAE
You will be able to perform realtime bounces in mono, stereo, and in all surround
formats that Logic Pro offers. Offline bounces are not possible when you use the DAE.