Boundless Technologies 4000 - Manual (Page 37)

22 Setup
The names of the menus will be displayed on the top status line as follows:
EXEC1 GLOBAL COMM1 AUX/COMM2 KEYBOARD1 SCREEN1 VISUAL1 MODE1 TAB1 FUNCT1 BELL
The currently displayed menu is identified by highlighting its name on the top status
line.
ENTER and SHIFT-ENTER are used to move back and forth respectively through
the menus. Moving from one menu selection to another can also be accomplished by
pressing the first letter of the selection itself (e.g. "B" to get to the BELL menu or "M"
to get to the MODE menu).
All but two Setup menu names have a number appended to them (1 or 2). This
number represents which host port parameters are being shown. For example,
EXEC1 or SCREEN1 are showing setup parameters for host port 1. Those menu
names with no numbers appended represent global parameters common to both
host ports
Cursor Keystrokes for Movement Within the Setup Menu
↑ or ↓ – Used to move the cursor up and down within a menu.
← , → or Space Bar – Used to select the parameter value or to perform the function
selected in the menu.
Menus have two types of fields. They are action fields and multiple choice fields.
1. An action field only has a single entry and is executed by pressing the Space Bar .
2. A multiple choice field has more than one option. The selected option is
displayed in
bold. To change parameters in a multiple choice field, press ← or
→ or the Space Bar until your choice is displayed.
To save changed parameter values in non-volatile memory, select Save in the EXEC
menu, or press "Y" at the prompt "SAVE PARAMETERS BEFORE EXIT ? (Y or
N). Selecting
" Y" at this field saves parameter values for both sessions.
Look at the bottom line in any setup menu if you forget these movement
keystrokes.
The following pages will display what will appear on your screen
as each menu is chosen, and a definition of the possible
parameters.