Apple MacBook Pro (15-inch, 2.53 GHz, Mid 2009) User Manual
Page 41
Advertising
Chapter 3
Boost Your MacBook Pro
41
6
Hold the drive by its sides while you gently pull the connector on the left side of the
drive to disconnect it.
The connector is attached to a cable and remains in the hard disk drive bay.
Important:
There are four (4) mounting screws on the sides of your hard disk drive.
If your replacement drive doesn’t include mounting screws, remove the ones from your
old drive and mount them on the replacement drive before you install it.
7
Attach the connector to the left side of the replacement drive.
Mounting screws
Advertising