Blaupunkt BRIGHTON MP35 - Manual (Page 24)

50
CLOCK time
Displaying the clock time
To display the clock time briefly,
➮
press and hold down the SRC
button
2
until the clock time ap-
pears in the display.
Setting the clock time
To set the clock time,
➮
press the MENU button
8
.
➮
Press the or button
7
repeat-
edly until “CLOCK SET” appears in
the display.
➮
Press the button
7
.
The clock time appears in the display.
The hours flash and can be adjusted.
➮
Adjust the hours using the / but-
tons
7
.
Once the hours are set,
➮
press the button
7
.
The minutes flash.
➮
Adjust the minutes using the /
buttons
7
.
➮
Press the MENU button
8
twice.
Selecting 12/24-hour clock
mode
➮
Press the MENU button
8
.
“MENU” appears in the display.
➮
Press the or button
7
repeat-
edly until “24 H MODE” or “12 H
MODE” appears in the display.
➮
Press the or button
7
to
switch between the modes.
When you have finished adjusting the
setting,
➮
press the MENU button
8
.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is
off and the vehicle ignition is on,
➮
press the MENU button
8
.
“MENU” appears in the display.
➮
Press the or button
7
repeat-
edly until “CLOCK OFF” or
“CLOCK ON” appears in the dis-
play.
➮
Press the or button
7
to
switch between the ON/OFF set-
tings.
When you have finished adjusting the
setting,
➮
press the MENU button
8
.
Briefly displaying the time when
the device is switched off
To display the time briefly when the de-
vice is off,
➮
press the SRC button
2
.
The time is displayed for eight seconds.
CLOCK TIME