Bissell VAC & SHINE 60P4 - Manual (Page 7)

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
7
O
perations
M
aintenance and care
Wet mop
1. By squeezing the trigger, you will turn
off the vacuum suction.
2. Water and Solution will flow to the 2
spray tips on the Wet Mop side. Gently
mop the floor with the Gentle Clean ®
MicroFiber pad. Depressing the trigger will
dispense water and solution based on your
cleaning job.
Sticky, dirty areas may require more
water and solution.
Floor will need to air dry for 3-5 minutes.
1. After Wet Mopping, remove the
MicroFiber Pad to launder or wash.
To wash, simply toss in the wash, air dry and
reuse. No need to buy disposable cloths every
time you use your Vac&Shine!
your Vac&shine can be stored
ready-to-use, by leaving water and
formula in the Clean Tank.
1. To charge while storing, place the
charger plug into the charging port on the
side of the unit. Make sure it is securely
connected and the charger indicator light
is illuminated.
1.
2.
1.
Tip:
You do not have to empty the
Dirty Tank before wet mopping.
storing and Charging your Vac&shine
Spray Tips
Charger Plug
Cleaning the Gentle Clean ® microfiber Pad