Select blower option and installation type, Model p6 single interior blower typical ductwork, Model p12 dual interior blower typical ductwork – Best WP29M User Manual
Page 5
- 5 -
1. SELECT BLOWER OPTION AND INSTALLATION TYPE
1.2 D
UCTED
I
NSTALLATION
For a ducted installation, either an interior or exterior blower or in-line blower may be used with this hood. The Best by Broan
WP29M Series must be installed with blower models P6, P12, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only.
Other blowers cannot be substituted. (Blowers sold separately.)
Plan where and how the ductwork will be installed.
If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1 up to 8, 11, 12, 14
and up of this manual.
Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. Use metal duct tape to
seal duct joints.
1.1 N
ON
-D
UCTED
I
NSTALLATION
For a non-ducted installation, we recommend using interior blower Best by Broan model P6 for effectiveness. (Blower sold
separately.)
The non-duct kit ANKWP Series (sold separately) must be installed. This kit fits hood from 30-inch width up to 48-inch
width. See installation instructions included with the non-duct kit ANKWP Series.
7" (178 mm)
ROUND DUCT
ROOF CAP
7" (178 mm)
ROUND
ELBOW
24" TO 30" (609 mm to 762 mm)
ABOVE COOKING SURFACE
WALL CAP
HOOD
DECORATIVE
FLUE
or SOFFIT
6" or 12"
(152 mm
or 305 mm)
HH0068A
MODEL P6 SINGLE INTERIOR BLOWER
TYPICAL DUCTWORK
HOOD
DECORATIVE
FLUE or SOFFIT 6" or 12"
(152 mm
or 305 mm)
ROUND
TRANSITION
4½" x 18½" to 10"
(114 mm x 470 mm
to 254 mm)
(see page 3)
10" (254 mm)
ROUND DUCT
ROOF
CAP
HH0069A
24" to 30" (609 mm to 762 mm)
ABOVE COOKING SURFACE
WALL
CAP
MODEL P12 DUAL INTERIOR BLOWER
TYPICAL DUCTWORK
EXTERIOR BLOWER
EXTERIOR
BLOWER
DECORATIVE FLUE
or SOFFIT
HH0070A
24" to 30" (609 mm to 762 mm)
ABOVE COOKING SURFACE
10" (254 mm)
ROUND DUCT
10" (254 mm)
ROUND ELBOW
HOOD
6" or 12"
(152 mm
or 305 mm)
MODEL EB6, EB9, EB12 OR EB15
EXTERIOR BLOWER TYPICAL DUCTWORK
In-line blower
10” round duct
HH0071A
24” to 30”
(609 to 762 mm)
above cooking
surface
Roof cap
Wall
cap
Hood
MODEL ILB3, ILB6, ILB9 OR ILB11
IN-LINE BLOWER TYPICAL DUCTWORK