Apple Color 1.5 - Manual (Page 425)

• M2: Inch playback
• M3: Disable grade
• Bank1: Switch/Copy/Paste Grade Bank 1
• Bank2: Switch/Copy/Paste Grade Bank 2
• Bank3: Switch/Copy/Paste Grade Bank 3
• Bank4: Switch/Copy/Paste Grade Bank 4
• Assign: Toggle Switch/Copy/Paste grade. (LCD Display would indicate which state you
are in.)
Using the Navigational Controls
There are two different ways to navigate in the Timeline using the keypad on the
MCS-3000.
To switch between timecode and shot number navigation
1 Press Mode Locate or Set Locate on the MCS-3000.
2 Hold down Shift (the blue button under the F-buttons), then press Mode Locate.
The indicators on the MCS-3000 will switch between 00 00 00 00 (Timecode) and 0 (Shot
ID) to let you know what mode you’re in.
To locate a position on the Timeline using timecode (in timecode mode)
1 Press Mode Locate or Set Locate on the MCS-3000.
2 Enter the Timecode you wish to locate, then press Enter.
The playhead moves to that timecode location.
To locate a position on the Timeline using shot numbers (in shot number mode)
1 Press Mode Locate or Set Locate on the MCS-3000.
2 Enter the Shot ID you wish to locate, then press Enter.
The playhead moves to the shot associated with that ID on the Timeline.
425 Appendix D Setting Up a Control Surface