Connecting and disconnecting ipod nano, About the battery, Disconnecting ipod nano from – Apple iPod nano (7th generation) User Manual
Page 13: Your computer, Connecting ipod nano to your computer, Disconnecting ipod nano from your computer
Chapter 3
Basics
13
Connecting and disconnecting iPod nano
You connect iPod nano to your computer to sync files and charge the iPod nano battery. You can
sync songs and charge the battery at the same time.
Important:
The battery doesn’t charge while your computer is in sleep or standby mode.
Connecting iPod nano to your computer
iTunes syncs songs on iPod nano automatically when you connect it to your computer, unless
you select other sync settings in iTunes.
Connect iPod nano to your computer:
m
Connect the included Lightning Cable to a high-power USB 2.0 port or USB 3.0 port on your
computer. Connect the other end to iPod nano.
The USB port on most keyboards doesn’t provide enough power to charge iPod nano.
Disconnecting iPod nano from your computer
If the backlight is off, press the Sleep/Wake button to turn on the backlight, so you can see if it’s
safe to disconnect.
Disconnect iPod nano:
m
Wait until you see the Home screen, or a message that says it’s OK to disconnect, then disconnect
the cable from iPod nano.
Don’t disconnect iPod nano if you see the “Connected” or “Synchronizing” message. To avoid
damaging files on iPod nano, you must eject iPod nano before disconnecting when you see
these messages.
Eject iPod nano:
m
In iTunes, choose Controls > Eject Disc, or click the Eject button next to iPod nano.
m
If you’re using a Mac, you can drag the iPod nano icon on the desktop to the Trash.
m
If you’re using a Windows PC, you can eject iPod nano in My Computer, or by clicking the Safely
Remove Hardware icon in the Windows system tray, then selecting iPod nano.
If you accidentally disconnect iPod nano without ejecting it, reconnect iPod nano to your
computer and sync again.
About the battery
WARNING:
For important safety information about the battery and charging iPod nano, see
on page 60.
iPod nano has an internal, non–user-replaceable battery. For best results, the first time you use
iPod nano, let it charge for about three hours or until the battery icon shows that the battery is
fully charged.
The iPod nano battery is 80-percent charged in about one and a half hours, and fully charged
in about three hours. If you charge iPod nano while adding files, playing music, listening to the
radio, or viewing a slideshow, it might take longer.