Apple MacBook (13-inch, Mid 2010) - Manual (Page 11)

11 Chapter 1 Ready, Set Up, Go
When you connect the power adapter to your MacBook, an indicator light on the
MagSafe connector starts to glow. An amber light indicates that the battery is charging.
A green light indicates that the battery is fully charged. If you don’t see a light, make
sure the connector is seated properly and the power adapter is plugged in.
Step 2: Connect to a wireless or wired network.
 To use a wireless network with the built-in 802.11n Wi-Fi technology, make sure that
the wireless base station is turned on and that you know the name of the network.
After you turn on your MacBook, Setup Assistant guides you through the connection
process. For troubleshooting tips, see page 64.
 To use a wired connection, connect one end of an Ethernet cable to your MacBook
and the other end to a cable modem, DSL modem, or network.
®
Ethernet
cable
Gigabit Ethernet port
(10/100/1000Base-T) G