Document Outline

• Ultra Portable Projector
• VP150X
• Outline
• Features
• Copyright
• Disclaimer
• Warning
  • Fill this in!!
• Safety Instructions
  • 1. Read this user’s guide before you operate your projector and save it for future reference.
  • 2. When the lamp becomes extremely hot during operation, allow the projector to cool for approxim...
  • 3. Power is still available when the projector is in the standby mode. Never replace lamp assembl...
  • 4. Do not attempt to service this product yourself, as opening or removing covers may damage the ...
  • 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing ...
  • 6. The standard remote control contains a low-power laser that acts as a pointing device during p...
  • 7. This product is capable of displaying inverted images for ceiling mount configurations. Please...
  • 8. Openings in front or at two sides are for ventilation. They must not be blocked or covered.
  • 9. For ventilation reasons, fans continue to operate for about 1 minute after the projector is po...
  • 10. Do not look straight at the projector lens during operation. The intense light beam may injur...
• Introduction
  • Projector Features
  • A. Image Resolution
  • B. Brightness
  • C. Portability
  • D. Keystone
  • E. Multilanguage
  • F. Auto Detect System
  • G. Ceiling Mount and Rear Screen Projection
  • H. Auto adjustment (I-key)
    • Description
    • A FRONT
      • Figure 1. Front view
    • B RIGHT
      • Figure 2. Right view
    • C BOTTOM
      • Figure 3. Bottom view
      • Installation
    • A Image Size Adjustment
      • Figure 4. Positioning
    • B Adjustable Feet
      • Figure 5. Adjustable feet
      • Moving the Projector
        • Figure 6. Moving the projector
      • Accessories
        • Figure 7. Accessories
• Connection
  • Connect the Projector to Computer
    • Figure 8. Connect to PC
  • Connect the Projector to Notebook
    • Figure 9. Connect to notebook
  • Connect the Projector to Macintosh
    • Figure 10. Connect to Macintosh
  • Connect the Projector to Power Book
    • Figure 11. Connect to Power Book
  • Connect to Video/ S-Video
    • Figure 12. Connect to Video, S-Video
• Operation
  • Turn On/Off Procedure
  • A Power on
  • B Standby
    • External Control
  • A Control Pad
    • Figure 13. External control pad
  • MAIN UNIT
  • FUNCTION
    • B Remote Control
      • Figure 14. Remote control
  • Main Unit
  • Function
    • Inserting Batteries in the Remote Control
      • Figure 15. Battery replacement process
    • Remote Control Range
      • Figure 16. Range
    • Usage and Replacement of Lamp
    • A Lamp/Temperature Status LED Indicator
      • 1. Excessive lamp service hours
      • 2. Lamp is not well attached
      • 3. Temperature is too high
      • 4. Normal status
    • B Lamp Replacement
      • Lamp Replacement Procedure
        • Figure 17. Lamp replacement: Step 1, Step 2, Step 3
      • Resetting Lamp Timer
  • OSD
  • FUNCTION
    • OSD
    • Main OSD Menu
      • Figure 18. Main OSD menu
    • A Display Page
      • Figure 19. Display sub-page when the input source is PC (with/without video, s-video).
      • Figure 20. Display sub-page when the input source is video, s-video.
  • Setting effects
    • B Image Page
      • Figure 21. Image sub-page Only available when the input signal is PC.
      • Figure 22. Image sub-page
      • Only available when the input signal is from video, S-video
  • Setting effects
    • C Control Page
      • Figure 23. Control sub-page
  • Setting effects
    • D Source Page
      • Figure 24. Source sub-page (video, s-video)
      • Other Correspondent and Remote Functions Messages
  • OSD
  • FUNCTION
• Maintenance and Troubleshooting
  • A Lamp Replacement
  • B Cleaning the Lens
    • 1. Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth (abrasive cleaners, sol...
    • 2. Avoid using an excessive amount of cleaner.
    • 3. Lightly wipe the clean cloth over the lens.
    • 4. Affix the lens cover whenever the projector is not in use.
  • C Troubleshooting
  • PROBLEMS
  • TRY THESE SOLUTIONS
• Specifications
  • A Optical
  • B Electrical
  • C Mechanical
  • D Preset Display Resolution Table