Apple Macintosh PowerBook Internal Modem/Ethernet - Manual

Setting up your modem’s connections
The PowerBook G3 Internal Modem is already installed in your PowerBook.
To use the modem you need
m the single-line telephone cord supplied with your PowerBook, which has a
two-wire RJ-11 connector at each end
m an analog telephone line with a modular jack
m (optional) the PowerBook G3 Internal Modem/Ethernet Adapter
(a Y-adapter that is supplied with your PowerBook) to use the modem
while connected to an Ethernet network
Connecting the telephone line to the modem
Follow these steps to connect the telephone line to the modem.
1 Open the cover on the computer’s back panel and check the label on the inside of the
cover to verify that your computer has the Ethernet/modem card.
Label showing icon for card
Connector for
Ethernet/modem
or Ethernet card
1