Setup displays, Setup music modes, Memory backup/restore – B&K AVR515 User Manual
Page 33: Display menu, see
SETUP DISPLAYS
Front Panel - Describes the possible selections for the brightness of the front panel display. Bright, medium,
dim.
OSD Color - Set the preferred color for the OSD menu. Default setting
is blue. Select from Blue, Purple, Pink, Aqua, Lilac, Yellow, Red, or
Green.
On Screen - All changes that are made to the receiver (volume, input,
tuner frequency, etc. are displayed on the front panel. You can choose
how much information is also displayed with the On-Screen Display
(OSD).
Major Change - OSD will display changes to input and
saving/recalling presets.
All Changes - OSD will display changes to input, saving/recalling presets, tuner station entry, Volume,
bass, treble, channel gain and decoder adjustments.
Off - OSD will only display when the INFO button is pressed from the remote control or when
entering into the menu system. (Default)
On Screen Time - This setting defines the length of time the info screen will display through the video output.
The info screen timer may need to be adjusted when using video devices that auto detect the video resolu-
tion. Sometimes high definition monitors need more time to auto-detect to the low definition resolution of the
splash screen. Most monitors will be compatible with the default time of 5 seconds.
SETUP MUSIC MODES
B&K supports two different two-channel decoders; DTS NEO:6 and
Dolby Pro Logic IIx. Each decoder supports surround adjustments that
can be made pertaining to how audio information is directed throughout
the soundstage. These adjustments apply only to the music mode of
these decoders. In this menu you can set the preferred settings. The
settings can be adjusted on the fly using the remote. The settings will
always return to the settings in this menu when you first select the
music mode. See
for a description of what these settings do.
This menu allows a backup to be made of all the customized settings
that have been made to the AVR515 Series2 or AVR517 Series2. The
options in this selection are BACKUP and RESTORE. Even if a backup
is not made, any customized settings will not be lost during normal day
to day operation. It is a good idea to create a backup once all the
settings have been made. These settings are then stored on an internal
EEPROM. Select RESTORE, if you desire to recall the memory
backup.
Note: Factory Reset will erase of a previous memory backup.
31
SETUP D
DISPLAYS
1 F
Front P
Panel
Bright
2 O
OSD C
Color
B
Blue
3 O
On S
Screen
O
Off
4 O
On S
Screen T
Time
5.0
↑↓ next iitem aadjust ←→
MENU m
main m
menu
SETUP M
MUSIC M
MODES
1 N
NEO:6 C
Center I
Image 0
0.3
2 P
PLIIx C
Center W
Width
3
3 P
PLIIx D
Dimension
0
rear f
front
4 P
PLIIx P
Panorama Y
YES
↑↓ next iitem EENT sselect
MENU m
main m
menu
MEMORY B
BACKUP R
RESTORE
1 M
Memory O
Operation B
Backup
Save A
ALL m
memory
settings i
in E
EEPROM
ENT p
perform a
adjust
←→
MENU m
main m
menu