Exa 18, Exa18, Exaptl 18 – MBW EXA30 User Manual
Page 5: Exal18, Caution, Notice, Not in decal set, Operating instructions
- 2 -
WARNING
MOVING PARTS CAN
CRUSH AND CUT
13019
STAY CLEAR OF
MOVING PARTS
09867
U.S. PATENTS PENDING
13066
U.S. PATENT 5,244,306
CAUTION
Machine may fall and
cause damage or injury
if lifted improperly.
13909
When lifting, attach
proper safety chains
through top frame.
Weight~ #1500 (680kg
)
13719
OPERATING
INSTRUCTIONS
1. Back Pressure in return lines
MUST NOT EXCEED 200 PSI.
2. Hydraulic Requirements:
Pressure 1500---3000 psi
Volume
10---40 GPM
3. Check for loose hardware after
every 20 hours of operation.
4. Do not run exciter when attach-
ment is not in contact with backfill.
5. Not recommended for use on
excavators over 50,000 lbs.
NOTICE
Premature wear may occur if
preventive maintenance is
not performed.
GREASE DRUM HUBS DAILY.
19179
CAUTION
HOT SURFACE
DO NOT TOUCH
SURFACE CHAUDE
NE PAS TOUCHER
EXAPTL 18
MBW INC.
250 HARTFORD ROAD
P.O. BOX 440
SLINGER, WI 53086
PHONE: 262 ---644 ---5234
FAX: 262 ---644 ---5169
15860
CAUTION
Machine may fall and
cause damage or injury
if lifted improperly.
15862
When lifting, attach
proper safety chains
through top frame.
Weight~#1090 (495kg)
15861
OPERATING
INSTRUCTIONS
1. Back Pressure in return lines
MUST NOT EXCEED 200 PSI.
2. Hydraulic Requirements:
Pressure 1500---3000 psi
Volume
10---40 GPM
3. Check for loose hardware after
every 20 hours of operation.
4. Do not run exciter when attach-
ment is not in contact with backfill.
5. Not recommended for use on
excavators over 20,000 lbs.
Safety Decals (Decal Set #13047)
WARNING
MOVING PARTS CAN
CRUSH AND CUT
13019
STAY CLEAR OF
MOVING PARTS
EXA 18
MBW INC.
250 HARTFORD ROAD
P.O. BOX 440
SLINGER, WI 53086
PHONE: 262 ---644 ---5234
FAX: 262 ---644 ---5169
13718
09867
U.S. PATENTS PENDING
13066
U.S. PATENT 5,244,306
10861
15860
09867 *
13019
15862
13719
13718
19179
13019
09867*
13066
13909
09311*
13066
EXA18
EXAL18
*NOT IN DECAL SET