Bissell 1699 - Manual (Page 14)

3. Set Ready Tools Dial to the Tools/Pretreat Setting. This
will allow spray and divert the suction to the hose.
*SmartTemp heats the cleaning solution for
carpet and bare floor application only. It
does not heat solution sprayed through the
accessory tools.
4. Set SmartMix Dial to Normal.
5. Attach the cleaning tool to the end of the hose.
6. Plug in and turn on the Power Switch.
7. Clean by pressing the trigger to spray solution
onto the area to be cleaned. Slowly move the tool
back and forth over the soiled surface. Release
the trigger to suction soiled water. Continue to
clean in the area, working in small sections, until
no more dirt can be removed. Rinse (optional) and
suction as needed. Caution: Do no overwet.
8. When cleaning is complete, remove and rinse
tools in clean, running water.
9. Coil hose around the Tool Caddy.
10. Empty Water Tank and rinse out, following the
instructions on page 11.
11. Return Ready Tools Dial to Floor Cleaning.
Keep plenty of genuine BISSELL Fiber Cleansing
Formula™ and Scotchgard™ protector cartridges
on hand so you can clean and protect whenever
it fits your schedule. Always use genuine BISSELL
deep cleaning formulas.
C
leaning with Attachments (Continued)
C
leaning Fluid Section
48 oz. BISSELL
Fiber Cleansing
Formula
™ with
Scotchgard ™
Protector
item # 0710
48 oz. BISSELL
Multi-Allergen
Removal
™ Formula
with Scotchgard ™
Protector
item # 0720
48 oz. BISSELL
Pet Odor and Soil
Removal
™ Formula
with Scotchgard ™
Protector
item # 0730
48 oz. BISSELL
Natural Orange
Extract Formula with
Scotchgard
™ Protector
item # 0740
WARNING:
To Reduce the Risk of Fire
and Electric Shock due to
internal component damage,
use only BISSELL cleaning
fluids intended for use with
the deep cleaner. Non-
BISSELL cleaning solutions
may harm the machine and
void the warranty.
5
Tip:
Deep cleaning carpeting and
upholstery with BISSELL
Multi-Allergen Removal
Formula
™ with Scotchgard ™
protector regularly can
reduce dust and allergens
in your home.
14
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
ug310-5868_1699_306.indd 14 ug310-5868_1699_306.indd 14 3/1/06 3:13:54 PM 3/1/06 3:13:54 PM