Belkin PM01116-A User Manual
Page 34
32
G
+
Wireless Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRnaTe seTUP MeTHod
setting your Internet service Provider (IsP) Connection Type to layer 2 Tunneling Protocol (l2TP)
[Israel Only]� Some ISPs require a connection using L2TP protocol, a type of connection most common in Israel� This sets up a direct connection to
the ISP’s system� Type in the information provided by your ISP in the space provided� When you have finished, click “Apply Changes”
(7)� After you
apply the changes, the “Internet Status” indicator will read “Connection OK” if your Router is set up properly�
1� l2TP account
Provided by your ISP� Enter your L2TP User ID here�
2� l2TP Password
Type in your password and retype it into the “Retype Password” box to
confirm it�
3� Host name
Provided by your ISP� Enter your host name here�
4� service IP address
Provided by your ISP� Enter your L2TP gateway/service IP address here�
5� IP assigned by IsP
If your ISP provided you with a specific IP address, select “Yes” and
enter your IP address and subnet mask in the fields that appear�
6� disconnect after X minutes…
This feature is used to automatically disconnect the Router from your
ISP when there is no activity for a specified period of time� For instance,
placing a check mark next to this option and entering “5” into the minute
field will cause the Router to disconnect from the Internet after five
minutes of no Internet activity� This option should be used if you pay for
your Internet service by the minute�
(1)
(2)
(4)
(3)
(5)
(6)
(7)