Product safety – Lukas Rerailing system User Manual
Page 5
5
2. Product safety
LUKAS products are developed and manufactured to ensure the best performance and 
quality when used as intended.
The safety of the operator is the most important consideration in product design. Furthermore, 
the operating instructions are intended to help in using LUKAS products safely.
The generally applicable legal and other binding regulations pertaining to the prevention of 
accidents and protection of the environment apply and are to be complied with in addition to 
the operating instructions.
The equipment must only be operated by persons with appropriate training in the safety 
aspects of such equipment – otherwise, there is a danger of injury.
We would like to point out to all users that they should read carefully the operating instructions 
and the instructions contained therein before they use the equipment, and that they should 
carefully follow such.
We further recommend you have a qualifi ed trainer show you how to use the product.
WARNING / CAUTION!
The operating instructions for the hoses, the accessories and the connected 
devices must also be heeded!
Even if you have already received instruction on how to use the equipment, you should still 
read through the following safety instructions again.
Please ensure that no body 
parts or clothing get stuck 
between the visibly moving 
parts.
Working under suspended 
loads is not permitted where 
such loads are being lifted 
only using hydraulic devices. 
If working under suspended 
loads is unavoidable, suitable 
mechanical props are also 
required.
Wear protective clothing, 
a safety helmet with visor, 
protective footwear and gloves
Inspect the device before and 
after use for visible defects or 
damage.
Immediately report any 
changes that occur (including 
changes in operating 
behaviour) to the appropriate 
persons/departments! If 
necessary, the equipment is to 
be shut down immediately and 
secured!
Check all lines, hoses and 
screwed connections for leaks 
and externally visible damage, 
and repair immediately! 
Escaping hydraulic fl uid can 
cause injuries and fi res.
WARNING / CAUTION!
Ensure that the accessories and connected equipment are suitable for the 
maximum operating pressure!