Beam Electrolux Serenity Plus Power Brush - Manual (Page 6)

5
CARE AND CLEANING
WARNING:
Always switch off the powerbrush and discon-
nect plug from wall electrical outlet and disconnect the hose before servicing
the Powerbrush.
General Cleaning
The Powerbrush can be wiped with a cloth dampened with warm water and a
mild detergent.
1.
Do not use abrasive substances.
2.
Do not use any solvents.
3.
Do not immerse in water or allow water to enter the Powerbrush.
Brush Roller Cleaning
For top cleaning performance, it is recommended that the brush roller and the
brush roller compartment be cleaned on an occasional basis.
1.
To remove fibers or hair entangles around the brush roller, cut parallel to
brush roller
2. You may further clean the brush compartment with your central vacuum
system.
For belt and lamp replacement return powerbrush to your authorized Beam
dealer.
POWERBRUSH WARRANTY
Only the superb quality of our Powerbrush makes a warranty like this possible!
*Three-Year Warranty
Within three years from date of purchase, should our Powerbrush, including
the cogged belt and fluorescent lamp, fail to function due to faulty workman-
ship or material, simply bring it back to your authorized Dealer where they will
replace or repair it (our option).