Smittybilt 17390 Bolt-On Fender Flares User Manual
Page 2
WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Bolt-On Fender Flares
Ford F250/F350 (99-07)
Part #17390
STEP 5:
Clean the body areas where the Fender
Flares will makes contact. Use the supplied alcohol wipe.
STEP 6:
Remove all 5.5mm socket head screws and
retain for installation of Fender Flares.
For models equipped with factory fender flares, removal
of factory flares is required, please consult the vehicle
service manual for factory fender flare removal.
STEP 3:
Pulling at right angles to the extrusion,
remove the liner from the extrusion in small portions and
apply thumb pressure to ensure that it adheres to the
Fender Flares.
STEP 4:
Trim any unnecesary extrusion and discard.