Installation instructions, Src jk tubular rear doors – Smittybilt SB76792 SRC JK Tubular front Doors User Manual
Page 2

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 W Artesia, Compton, CA 90220
Installation Instructions:
(Part # SB76792)
SRC JK Tubular Rear Doors
Revised 7.28.10
Step 9: Carefully adjust the (2) door hinges to level the door on the vehicle.
Step 10: Install the rubber bumper (90-4264) into the tube door frame.
NOTE: Using dish soap may aid in installation of the rubber bumper.
Step 11: Once the door is adjusted properly torque the hardware according to the chart on
page 3.
Step 12: Install the new limit strap (769401) to the mount on the inside of the vehicle.
Step 13: Repeat the previous steps on the remaining side of the vehicle.
Step 14: Installation is now complete.
3/8”
Nuts
769401 Limit
Strap
OE Hinge
Bracket
Tube Door
93-8069 drvr
and
93-8073 pass
3/8”
Bolts
Door Hinge
93-5862 drvr
and 93-5864
pass
Door Hinge 93-5862
drvr and 93-5864 pass
90-5868 Limit
Strap Bracket