Smittybilt 897xx Door Skins Pair - Manual (Page 2)

Installation Instructions
Door Skins Pair (#896xx,897xx)
1987-2006 Jeep Wrangler s
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
3. Insert the lower front corner of the Frame into the Door Skin (tight fit).
4. Wrap the Velcro around the Frame that runs the length of the bottom and secure.
5. Make sure the three legs of the Frame are seated in the 3 cut-away parts of the Door Skin.
Close the 2 large and 1 small flaps on the bottom of the Door Skin. Now is Door Skin is
assembled.
6. Locate the three holes in the vehicle’s doorframe and insert the Frame Legs into those holes.
7. Unzip the Door Skin Window.
8. Pull out the insertion flap on the bottom of the Door Skin.
9. Beginning on the corner, fold and insert the flap into the channel slot along the door.
10. Snap the button to the door and zip-up the Door Skin Window. (Some models)