Smittybilt 495xx Replacement Front Seat User Manual
Installation instructions
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Replacement Front Seat
(Part # 450xx, 455xx, 451xx, 495xx)
1976-2010 CJ & Wranglers
WWW.SMITTYBILT.COM
Note: All seats being installed in 1997 - 2006 Jeep ® TJ Wranglers will require a seat adaptor bracket
Included components:
(1) Seat
(1) Plastic Cover (LH)
(1) Plastic Cover (RH)
(1) Recliner knob
Knob
Plastic Cover
Knob fully seated on the
recliner shaft.
Replacement Seat Assembly
1. Firmly press plastic cover to the side of the metal seat recliner bracket for each side.
2. Place recliner knob over recliner shaft and press firmly. Repeat for other side.
3. Recheck to make sure covers and knobs are securely seated and attached before installing seats.
Replacement Seat Installation
4. Remove old seat from riser by removing 4 bolts.
Save these bolts as they will be reused later.