Smittybilt 933xx Standard Top - Manual (Page 2)

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Standard Top (Part # 933xx)
1997-2006 Jeep Wrangler
Step 3: The sides of the brief can be attached two different ways. If your vehicle is equipped with the
factory door surrounds the slide the plastic channel on the side of the brief into the channel on top
of the door surround.
If your vehicle does not have the door surrounds wrap the flap on the side of the brief around the
crossbar and attach to Velcro on side of brief.
Step 4: Locate the rear corner straps and warp them around the roll bar and fasten into buckle. (Fig E, F)
If your vehicle is equipped with sound pods/bar it may be necessary to loosen them in order to slide
straps through.
Step 5: Locate the long center strap. Run the strap back around the center roll bar and back forward toward
the windshield frame. Put strap through footman loop on windshield frame and secure to buckle.
(Fig G)
(Fig E)
Step 6: Locate the two smaller center straps and wrap them around the center roll bar. (If vehicle is
equipped with sound-pods/bar you may need to loosen them in order to slide straps through.
(Fig H)
(Fig F)