Smittybilt D8865 Roof Rack Tire Mount User Manual
Page 3
WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Roof Rack Tire Mount
Part #D8545/D8555
D8655/D8865/D8875
Step 1:
Put your tire on a flat surface, and then measure from the surface to the bottom of
the lug nut hole. You need this to determine the height of the tire mount.
Step 2:
Once you have this measurement, mount the side plates to the tire mount, and adjust
the height of the top of the tire mount, so its ¼” less than the measurement you took
earlier.
Step 3:
Now mount the tire mount to flooring as shown in picture, making sure there is
enough room around it so the tire will fit flat on the flooring.
Step 4:
Install tire. Make sure that there is not too much, so the tire compresses slightly,
without bending the flooring tubes, or the mount.