Snorkel AB46JE User Manual
Page 58
Advertising
Chapter 12 – Troubleshooting
54
AB46JE – 0260072
Symptom
Possible Cause
Corrective Action
Electrical outlet does not
work.
Power supply not plugged in.
Plug a source of power into the power-
input connector on the wiring box.
GFCI is tripped.
Push reset button on outlet.
Hydraulic fluid temperature of
200°F (93°C) or more.
Prolonged boom operation.
Stop operation until fluid cools.
High pressure fluid return to reservoir
caused by kinked or twisted hose.
Remove the kink or twist from the hose.
Let fluid cool before operating.
Hydraulic system component failure.
Stow the machine and do not operate until
repairs are made.
Severe hydraulic leak.
Failure of hose, tube, fitting, seal,
etc.
Do not operate machine until repairs are
made.
Advertising