Daily inspection and maintenance, Daily inspection and maintenance table 7-1, Daily inspection and maintenance table, 7-1 – Snorkel AB50JRT User Manual

Page 48: Operators daily inspection, 7-1, Inspection and maintenance table, 7-1, Qualified, 7-1, 8-2, Daily inspection and maintenance table -1

Advertising
background image

❑

Diesel Engine

Keep the oil level between the marks on the
engine oil dipstick.

The distance between the top and bottom
dipstick marks corresponds to about 1 qt USA
(one liter). Add oil, if needed, at the top of the
engine.

See the “Specifications” chapter 3, for the correct
engine oil grade and weight.

■

Fuel Leaks

❑

Gasoline Engine

❑

Diesel Engine

Visually inspect the entire length of the fuel line,
from the engine to the fuel tank, for leaks.

■

Engine Coolant Level

At operating temperature the coolant should be at
the HOT level. When cold, there should be about
1 inch (2.5 cm) of coolant in the bottom of the
reservoir.

The coolant is half water and half antifreeze,
(Kubota recommends ethylene glycol antifreeze).

To add coolant:

1. Turn the engine OFF at the ground control

box Master Key Switch.

2. Remove the cap from the coolant reservoir.

3. Add coolant, then replace the cap.

AB50J – 0163189

page 7 - 3

7. Daily Inspection and Maintenance

Advertising