Snorkel MX19-sn50870-53195 - Manual (Page 14)

Transporting the Work Platform
Operation Manual Page 11
T
RANSPORTING THE
W
ORK
P
LATFORM
B
Y
C
R A N E
Secure the straps to Tie Down/Lifting D-Rings only.
B Y F O R K L I F T
D A N G E R ! !
Forklifting is for transport only.
See specifications for weight of work platform and be certain that forklift is of adequate capacity to lift
the work platform.
The MX19 may be forklifted from the rear end of the machine between the wheels.It can also be forklifted
from the side using the forklift pockets shown in the diagram.
Figure 6: Transporting the Work Platform
B Y T R U C K
Maneuver the work platform into transport position and chock the wheels. Secure the work platform to the
transport vehicle by attaching chains or straps of adequate load capacity to the Tie Down/Lifting D-Rings.
C A U T I O N
Overtightening of the chains or straps attached to the Tie Down/Lifting D-Rings may result in damage
to work platform.
Forklift
Tie Down/Lifting D-Rings
Located At Each End
Forklift
Pockets