Belkin PLAY F7D4302AU User Manual
Page 20
![background image](/manuals/54970/20/background.png)
18
GeTTInG TO KnOW YOUR ROUTeR
a) Modem (Wan) Connector
Connect your modem to this
port using an Ethernet cable .
b) Wired (lan) Connectors
Connect computers and other
wired network devices to these
ports using Ethernet cables .
C) Usb Port
USB printers, disks, and other
USB devices plugged into this
port will be shared on your
network . Each USB port has a
light that indicates its status .
Off: No USB device is
connected or the attached
USB device is not in use .
blinking: Please wait to
unplug the device until
the light turns off .
On: The USB device is
connected and being
shared on your network .
D) Reset button
This button is used to restart
your Router in rare cases when it
functions incorrectly . Resetting
the Router will preserve your
settings . This button may also
be used to restore the factory
default settings . Please see
the Troubleshooting section
for more information .
e) Power Connector
Connect the included power
supply to this jack .
back Panel
(a)
(b)
(c)
(d)
(e)