Vitek VT-1812 - Manual (Page 4)

- использования аппаратуры в профессиональных целях;
- отклонений от Государственных Технических Стандартов питающих,
телекоммуникационных и кабельных сетей;
- при выходе из строя деталей, обладающих ограниченным сроком
службы.
5. Настоящая гарантия не ущемляет законных прав потребителя,
предоставленных ему действующим законодательством.
РУССКИЙ
ASSEMBLING VACUUM CLEANER
Always remove the plug from the power socket before fitting or removing acces
sories!
1. Connecting vacuum cleaner
1. Fitting the flexible hose
Insert flexible hose into the air intake duct on the top of appliance. Press until it
clicks into position.
Removing the flexible hose:
Removing the plug from the power socket. To release the flexible hose firmly
from the air intake duct.
2. Fitting the extension tubes and accessories
a) Fitting the extension tube to the handle
b) Fitting the extension tubes
c) Fitting the brush to the extension tube
d) Fitting Floor brush
Ideal for the daily cleaning on carpets and hard floors.
2. Cleaning tools use
The crevise tool and dusting brush are stored on the accessories holder.
1. Crevise tool:
For radiators, сrevises,corners,baseboards and between cushions.
2. Dusting brushis used for the furniture,venation,blinds,book,lamp shades and
shelves.
3. The small brush is used for clean the sofa.
INSTRUCTIONS FOR USE
Before using appliance, unwind a sufficient length of cable and insert the plug
into the power socket. A yellow mark on the power cable shows the ideal cable
length. Don`t expend the cable beyond the red mark.
1. Press the ON/OFF button to switch the appliance on.
2. To On/Off Switch, press the On/Off Switch with one hand and guide the cable
with the other hand to ensure that it does not whip causing damage.
MAINTENANCE
1. Changing of the dust bag
Always operate the cleaner with dust bag installed.
4 13
ENGLISH
Vt-1812.qxd 25.07.03 10:17 Page 8