Snorkel ATB50 CE - Manual (Page 24)

u
Platform Gravity Gate
The platform gravity gate is the place in the
platform guardrail system where you should enter
and leave the platform.
Raise the gate and step under it onto the
platform.
A
CAUTION
Once you have entered the platform and
attached your fall restraint lanyard to an
anchor point, check to see that the gravity
gate has fallen back into place.
u
Ground Operation Switch
The Ground Operation switch prevents the
platform from moving if something accidentally
pushes one of the platform moving switches at
the ground control box. To make the platform
move you must push and hold the Ground
Operation switch up at the same time you use a
platform moving switch.
u
Operator Horn
The operator Horn is used primarily to get the
attention of people on the ground when you are
working aloft. For the horn to work the Battery
switch must be ON and the following switches, on
the ground control box, must be set as indicated:
Platform/Ground Selector . . . . . . . . PLATFORM
Emergency Stop. . . . . . . . . . . . Pulled Out (ON)
Master Key Switch . . . . . . . . . . . . . . . . . . . . ON
page 2 - 6 ATB 42/50 – 0161987EE
2. Safety Devices