Snorkel SRT2670 - Manual (Page 41)

Visually inspect the entire length of the fuel line,
from the engine to the fuel tank, for leaks.
■ Engine oil
Keep the oil level between the marks on the dipstick
(1).
The distance between the top and bottom dipstick
marks corresponds to about 1 qt. (one liter). Add oil,
if needed at the cap (2) on top of the engine.
See the “Specifications” chapter 3 for the
correct engine oil grade and weight.
■ Engine coolant
The Kubota engine is liquid cooled. At operating
temperatures the coolant should be at the HOT
level (1). When cold there should be approximately
1 inch (2.5 cm) of coolant in the bottom of the reser-
voir.
The coolant is half water and half ethylene glycol.
To add coolant:
Turn the engine OFF at the ground control box box
KEY SWITCH. Remove the cap (2) from the coolant
reservoir. Add coolant and replace cap.
■ Radiator cap
Visually check to see that the cap is in place and
tight.
■ Swinging gate (option)
Inspect the gate to see that it swings freely, latches
securely, and is not deformed in any way.
SRT2670 – 11360A page 7 - 3
7. Daily Inspection and Maintenance