Aries Automotive 1043 - Manual (Page 3)

To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Grille Guard.
For gloss black finishes: Mild soap may be used to clean the Grille Guard.
PASSENGER SIDE INSTALLATION PICTURED
Page 3 of 4
Remove these (2) push pins
Fig 2
Fig 1
Remove the (1) bolt
Remove (1) bolt
Fig 2A Fig 3
Spacer in place as
example for placement
(1) 10mm x 60mm hex bolt
(1) 10mm flat washer
(1) 10mm lock washer