Aries Automotive 2045-2 - Manual (Page 2)

Page 2 of 3 5/30/08 (AM)
11. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Grille Guard.
For gloss black finishes: Mild soap may be used to clean the Grille Guard.
(Driver Side Installation Shown)
Driver Side bottom
bracket shown
Slide top bracket
underneath this hole.
8mm bolt ..Note, this photo
does not washers, yet both
lock and flat 8mm should be
included
Figure 1
Figure 2
Figure 3