Aries Automotive P4068 - Manual (Page 6)

Driver Side Mounting Bracket Installation Pictured
Fig 12
(Fig 14) Driver side Top Bracket installation pictured
without foam for instruction purposes only
Front
Front
Front
Factory bumper
bracket bolt
(1) 10mm Button Head Bolt
(2) 10mm Flat Washers
(1) 10mm Nylon Lock Nut
Use a pair of needle nose pliers
to carefully pinch the top and
bottom tab on the clip to release
and remove the grille
(Fig 13) Apply adhesive backed Foam
Tape to inner and outer surface of Top
Brackets to protect factory bumper
(Fig 15) Driver side Top Bracket installation
pictured. Apply foam tape to Bracket. Apply
a layer of masking tape to the top of the
bumper for protection during installation
Page 6 of 6
11/15/13