Aries Automotive 45-4011 - Manual (Page 2)

Page 2 of 2
Installation Complete
Fig 2
Driver side shown
To protect your investment, wax this product after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives
that could damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish.
Mild soap may be used also to clean the Product.
For gloss black finishes: Mild soap may be used to clean the Product.
12mm x 35mm Hex Head Bolts
12mm Lock Washers
12mm Hex Nuts
12mm Flat Washers
(2) 10mm x 30mm Hex Head Bolts
(2) 10mm Lock Washers
(4) 10mm Flat Washers
(2) 10mm Nuts