Aries Automotive 7550 User Manual

Page 2

Advertising
background image

SPORT BAR

2014 KIA SORENTO/2013-14 HYUNDAI SANTA FE

Page 1 of 5

7/3/13 (DP)

PARTS LIST:

Qty Description

Qty

Description

1

Sport Bar

2

12-1.75mm x 50mm Hex Bolts

1

Driver/Left Frame Mounting Bracket

2

12mm x 32mm x 3mm Flat Washers

1

Passenger/Right Frame Mounting
Bracket

2

12mm Lock Washers

1

Driver/Left Support Bracket

5

10-1.5mm x 30mm Hex Bolts

1

Driver/Left Tube Mounting Bracket

13

10mm x 27mm x 3mm LRG Flat Washers

1

Passenger/Right Tube Mounting Bracket

1

10mm x 24mm x 2.2mm STD Flat Washer

2

10mm x 35mm Small Button Head Bolt
Plates (16mm x 50mm)

7

10mm Lock Washers

2

10mm x 35mm Large Button Head Bolt
Plates (18mm x 67mm)

2

10mm Locking Serrated Flange Nuts

4

10mm Plastic Retainers

7

10mm Hex Nuts

















PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED. CUTTING
IS REQUIRED.

2. Starting under the front of the vehicle, remove the large plastic splash guard, (Figure 10). NOTE: Pay

close attention to the size, type and location of all factory hardware for reinstallation.

3. Locate the mounting area at the front of the frame channel on the driver side, (Figure 1). Remove the

rubber plugs on the bottom and inner side of the frame channel. NOTE: It may be easier to access the
side of the frame from above, (Figure 5B). Open the hood and locate the mounting hole in the side of
the frame channel.

4. Select (1) 10mm Small Bolt Plate and (1) 10mm Plastic Retainer, (Figure 2A). Partially thread the

Retainer onto the Bolt Plate. IMPORTANT: The Plastic Retainer is designed to prevent the Bolt Plate
from falling into the frame channel and to aid in mounting the Bracket. Insert the Small Bolt Plate into
the hole in the side of the frame, (Figure 2C). Thread the Plastic Retainer all the way down until it is
against the frame.

5. Repeat Step 4 to install the Large Bolt Plate, (Figure 2B), in the hole in the bottom of the frame

channel, (Figure 2C).

(2) 10mm Large Bolt Plates

Passenger/Right Frame
Mounting Bracket

Passenger/Right Sport Bar
Mounting Bracket

Driver/Left Sport Bar
Mounting Bracket

Driver/Left Frame
Mounting Bracket

Driver/Left
Support Bracket

(2) 10mm Small Bolt Plates

Advertising