Aries Automotive 2801 - Manual (Page 2)

Page 2 of 2 11/18/2010
To protect your investment, wax this product after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives
that could damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish.
Mild soap may be used also to clean the product.
For gloss black finishes: Mild soap may be used to clean the product.
Fig 2A
(2)8mm x 25mm hex bolt
(4)8mm flat washer
(2)8mm Lock Washer
Fig 1
Driver/left side shown
(1)8mm x 40mm hex bolt
(1)8mm flat washer
(1)8mm Lock Washer
(1) Spacer
Per side
Remove license
plate
Fig 1A
Fig 2
5mm nut plate
5mm nut plate
Slide back
Factory 8mm
bolt removed
on skid shield
Fig 3
Fig 3A