Aries Automotive INS2504 - Manual

INSTALLATION INSTRUCTIONS
INTERIOR BAR #INTERIOR SPORT BAR
451 SMART CAR
PARTS LIST
1- ARIES INTERIOR BAR 2-6MM BOLTS
1- KICKER TUBE 2-6MM WASHER
1- SPACER 1-12MM WASHER
2- 8MM X 1.25 X 40MM BOLTS
2- 8MM WASHERS
INSTALLING THE INTERIOR BAR
1. Move the passenger and driver seats all the way forward.
2. Remove factory strap behind the passenger seat Diagram 1 leaving the spacer
and washer.
3. Remove the plastic plug behind the drivers seat Diagram 2, place the spacer
supplied in kit in this hole, place the interior bar over these spacers and mount
with the 8mm bolts and washers supplied in kit hand tighten to allow for
alignment.
4. Remove the 1 bolt holding the drivers seat down Diagram 3 fasten the kicker
tube with the factory bolt and the 12mm washer hand tighten to allow for
alignment.
5. Fasten the top of the kicker tube to the interior bar with the 6mm bolts and
washers.
6. Once everything is aligned begin to tighten all fasteners -Diagram 4 shows
finished product.
Diagram 1 Diagram 2