Advance Adapters SATURN - Manual (Page 7)

SATURN BREAKDOWN & ASSEMBLY INSTRUCTIONS
Planetary & Case Assembly
The overdrive has two basic parts which include
the planetary gear assembly & case assembly.
DISASSEMBLY OF THE PLANATARY GEAR ASSY.
Step P1
Using a small flathead screwdriver, remove the snap ring
from the gear housing.
Step P2
Using a 7/64” Allen wrench, remove the socket head screws
holding the beveled spacer. (Early model Warn units used 2
roll pins).
Step P3
Remove the thrust bearing sets. Take note that the thickest
race is next to the gear housing.
Step P4
Remove the thrust washers & bearing. Take note that the thin
race is next to the spider assembly.
Step P5
Thoroughly clean & inspect all parts for wear. Replace if
necessary.