Eppendorf FemtoJet express - Manual (Page 31)

79
5.1.1 Self-test
FUNC 6
The FemtoJet
®
is checked for leaks in the self-test.
This self-test can also be used if a leak is suspected.
The test runs automatically.
The pressure tube must be connected to a closed capillary
(e.g. melted closed or filled) for the pressure control to work
properly.
key: Complete self-test
– In the case of two different pressures, checks for leaks
in the pressure accumulator (p
s
) and for the internal
tightness of the valves.
– Checks for leaks in the area of working pressure (p
w
)
in the case of two different pressures.
– Checks behavior during injection
at different pressures (short continuous test).
If certain values are outside the specified range, an error
message is emitted. If this recurs, inform Service.
key: Self-test to search for leaks
– Checks for leaks in the pressure accumulator (p
s
) in the
case of two different pressures, as well as for inner
tightness of the valves.
– Checks for leaks in the area of working pressure (p
w
) in
the case of two different pressures.
If certain values are outside the specified range, an error
message is emitted. If this recurs, inform Service.
FUNC 6
Self-Test
INJECT = Complete
CLEAN = Leak only
Turn pi to
select function
FUNC 6
Self-Test
Ps leak _____ _____ hPa
Pw leak _____ _____ hPa
Injection _____ _____ hPa
ps=7000 pw= 18 hPa
FUNC 6
Self-Test
Ps leak _____ _____ hPa
Pw leak _____ _____ hPa
ps=7000 pw= 18 hPa
5 Troubleshooting
Troubleshooting
5
05_Fehlersuche_en.fm Seite 79 Freitag, 29. Juni 2007 2:50 14